

Stock Type steel or aluminum doors or approved replacements.Aftermarket nose and tail pieces may be used, but must match car.All body parts must maintain a minimum of 6″ ground clearance.Body must mount in the stock location or subject to weight penalty.Any deviation from this must be approved by Tech Officials. Front firewall must remain in car in the stock OEM location.All holes in front and rear firewall and floorboard must be covered with 16-ga.Hood, roof, trunk lid and trunk may be gutted.No sectioning, chopping, channeling, hulling or cutting of any kind, except for tire clearance and roll bars only.Fiberglass or Composite hood and roof permitted. Stock Appearing / Aftermarket Body Permitted (example: Five Star/Performance Bodies Street Stock Body) (Steel or Aluminum).


*Cars, parts and or equipment will not be considered as having been approved by having passed through inspection at any time or number of times unobserved or undetected. *Speedway reserves the right to update, modify, and/or delete rules at any time deemed necessary to insure safety, fair competition or any other reason that may be appropriate. No expressed or implied warranty of safety shall result from such alteration of specifications. * Speedway Officials shall be empowered to permit minor deviations from any of the specifications herein or impose any further restrictions that in his/her opinion does not alter the minimum acceptable requirements. Rules are intended as a guide for the conduct of the sport and are in no way a guarantee against injury or death to a participant. No expressed or implied warranty of safety shall result from publications of or compliance with these rules and/or regulations. All participants are deemed to have complied with these rules. These rules shall govern the condition of all such events. The rules and/or regulations set forth herein provide for the orderly conduct of racing events and to establish minimum acceptable requirements of such events. 2021 Montgomery Motor Speedway Street Stock
